we need Quick Scratch Buttons!
I saw a DJ using M-AUDIO TORQ and he showed me the QUICK SCRATCH BUTTONS...
I think all turntablism and scratch DJs are starving for this feature in scratch live ...
here's a video on www.torq-dj.com
what do you guys think?
I think all turntablism and scratch DJs are starving for this feature in scratch live ...
here's a video on www.torq-dj.com
what do you guys think?
At 3:46 AM 20 November 2009
Eskei83 wrote
cant say i need that feature,but what i liked about vid is that he has a rane mixer!!
At 9:23 AM 20 November 2009
Dax wrote
I used that function quite a bit when I was a torqer
At 8:06 PM 21 November 2009
DJ Dub Cowboy wrote
Good idea, i would like to work with this feature!!
At 3:36 PM 22 November 2009
DJ Rookie wrote
yeah, I think it will be a really cool feature, and I would like to use in in Scratch Live...
It takes me always a lot of time to find the right scratch sounds in my scratch-sounds crate, so to push one button to come to the sound would be a great idea...
Also with the new sample-banks in the sample player such a solution would be a great thing...
So I'll set this one on my wishlist for x-mas ;)
It takes me always a lot of time to find the right scratch sounds in my scratch-sounds crate, so to push one button to come to the sound would be a great idea...
Also with the new sample-banks in the sample player such a solution would be a great thing...
So I'll set this one on my wishlist for x-mas ;)
At 4:01 PM 22 November 2009
knox001 wrote
the easiest way would be a short-cut like "load SP6-Channel 3 to right deck"
and you put the highlight-samples in your SP6 for Quick-Access.
and you put the highlight-samples in your SP6 for Quick-Access.
At 2:30 AM 23 November 2009
Eskei83 wrote
Quote:
the easiest way would be a short-cut like "load SP6-Channel 3 to right deck"and you put the highlight-samples in your SP6 for Quick-Access.
I like that one.
At 11:33 AM 23 November 2009
nik39 wrote
this could be achieved when there is instant doubles to and from the sampler. You would have to always leave a couple scratch sounds in the sampler though.
This is exactly what I would do in torq. Out of the 16 sample slots 2 were the scratch sounds I used for quick scratch.
However, if we are going to take it this far... switching out tracks like that could be awesome too.
All we really need is a key combo and midi command for swapping a deck with a sample cell.
This is exactly what I would do in torq. Out of the 16 sample slots 2 were the scratch sounds I used for quick scratch.
However, if we are going to take it this far... switching out tracks like that could be awesome too.
All we really need is a key combo and midi command for swapping a deck with a sample cell.
At 4:51 PM 23 November 2009
DJ Dub Cowboy wrote
Quote:
All we really need is a key combo and midi command for swapping a deck with a sample cell.
that's what i'm talkin 'bout!
At 5:13 PM 23 November 2009
Eskei83 wrote
Quote:
sounds like no one likes this ideamany dudes hatin on that feature! but i think it's a nice thing!
so do like i did and tell your dj friends about this topic :D
At 7:40 PM 24 November 2009
Eskei83 wrote
Quote:
sounds like no one likes this idea/sarcasm
At 9:05 PM 24 November 2009
DJ Dub Cowboy wrote
i just have my scratch samples saved as "aaaaaaaaaaaaaaaaaaaah" or something with a lot of the same letters...i can load up a scratch sample pretty damn fast.
At 8:32 AM 25 November 2009
wrosenbl12 wrote
Quote:
i just have my scratch samples saved as "aaaaaaaaaaaaaaaaaaaah" or something with a lot of the same letters...i can load up a scratch sample pretty damn fast.good idea too ... but with a short cut it would be faster!
At 12:44 PM 25 November 2009
Eskei83 wrote
the djs from oversea need a while to understand the djs form europe :)
At 1:43 PM 25 November 2009
LukeSun wrote
I like that feature!
It's a pain having to jump to my scratch samples crate to load a scratch sequence, I also load my favourite scratch samples into a few of the SP6 sample banks and drag these onto the decks when I want to use them which saves some time, but you loose the currently loaded track which then have to relocate again.
+1
It's a pain having to jump to my scratch samples crate to load a scratch sequence, I also load my favourite scratch samples into a few of the SP6 sample banks and drag these onto the decks when I want to use them which saves some time, but you loose the currently loaded track which then have to relocate again.
+1
At 5:19 AM 26 November 2009
welly wrote
Quote:
I also load my favourite scratch samples into a few of the SP6 sample banks and drag these onto the decks when I want to use them which saves some time, but you loose the currently loaded track which then have to relocate again.I do the same thing. If I don´t want to lose a track I drag it to the prepare button.
Quick scratch would be sick though.
At 10:55 AM 26 November 2009
Dj.Mojo wrote
what if the program allowed the current song to KEEP Playing on the same deck and let u load the sample and scratch over top of it.
At 7:20 PM 30 November 2009
hersh20 wrote
that's why I am hoping for a quick swap with a sampler cell.
At 8:17 PM 30 November 2009
DJ Dub Cowboy wrote
Quote:
what if the program allowed the current song to KEEP Playing on the same deck and let u load the sample and scratch over top of it.i think that's not possible because of channel routing. when you got a song on the right deck and load a scratch sound to the right. the song is still playing on the right channel and the scratch sound is on it too ... you'll get problems when you move the crossfader ...
Quote:
that's why I am hoping for a quick swap with a sampler cell.that would be cool! that's excactly what i want!
At 2:51 AM 1 December 2009
Eskei83 wrote
QuickScratch-Buttons or QuickScratch-Midi Command would be a really nice feature!
At 12:19 PM 1 December 2009
imahu wrote
Being able to map the SP-6 samples to either deck would be an awesome feature
Serato, hook it up!!
Serato, hook it up!!
At 6:13 PM 3 December 2009
Corex wrote
what do you guys think about the feature "drop to quickscratch"?
if you drop the needle in the 10th ring of the control vinyl scratch live automaticly load the quickscratch sample. Its like you have scratch sounds on the last minute ring of the CV.
if you drop the needle in the 10th ring of the control vinyl scratch live automaticly load the quickscratch sample. Its like you have scratch sounds on the last minute ring of the CV.
At 2:19 AM 14 December 2009
Eskei83 wrote
they have that in some bootleg cv's don't they? either way it would be a dope addition.
At 2:58 AM 14 December 2009
Corex wrote
Quote:
they have that in some bootleg cv's don't they? either way it would be a dope addition.i don't know bout bootlegs, but when you have the samples on the record you've to switch to thru.
At 3:30 AM 14 December 2009
Eskei83 wrote
no cv mode guys... its as easy as a button like torq. its the only feature that all dvs systems lack but torq.
At 10:54 PM 15 December 2009
dj ductape wrote
both would be cool. i use drop to cue point and so i would use that feature as "drop to sample" too
At 11:47 PM 15 December 2009
Eskei83 wrote
I think an easy way to add to this feature to SSL is to create a "LOAD L" or "LOAD R" button to each sample player spot.
So when you're on Sample player mode you can choose one and load it to a side. Hit it again and it would remove the sample, replacing it with the original file .
Not something I would use personally, but so many of you like the idea I guess I can chime in.
So when you're on Sample player mode you can choose one and load it to a side. Hit it again and it would remove the sample, replacing it with the original file .
Not something I would use personally, but so many of you like the idea I guess I can chime in.
At 1:40 PM 29 December 2009
ZESH! wrote
please replace the word "easy" with "sensible" ^^
dammit no edit button =op
dammit no edit button =op
At 1:41 PM 29 December 2009
ZESH! wrote
Quote:
I think an easy way to add to this feature to SSL is to create a "LOAD L" or "LOAD R" button to each sample player spot.So when you're on Sample player mode you can choose one and load it to a side. Hit it again and it would remove the sample, replacing it with the original file .
Not something I would use personally, but so many of you like the idea I guess I can chime in.
thats it !!!!!!
At 7:00 PM 31 December 2009
dj ductape wrote
thats right eskei!Im down with that and also we need more! cue points i think !
At 5:26 PM 8 January 2010
mazelo wrote
To post on the forum you need to log in. Click here to log in, or if you do not yet have an account then click here to create an account.
