How to properly gain some of the best performance for the ttm57-sl effects
Some of these settings have been mentioned here in the forum and others are my personal preference so I figured making a post about it since people have been asking about proper settings on ttm-57sl effects.
Best Effect Settings For TTM 57SL
DONT FORGET TO SAVE YOUR SETTINGS BY GOING TO SET-UP THAN TO HARDWARE AND CLICK ON "SAVE TO MIXER" EACH TIME YOU CONFIGURE A EFFECT TO THE APPROPRIATE DECK.
Manual High Pass Filter
Deck-1
Frequency-Turn left till white line gets thin
Resonance-3.0
Mix-100%
Operation-Move p1 knob clockwise from left to right
Flanger
Deck-1
Mix-100%
Delay Time-X16 (Turn J1 Knob To X16)
Delay/Depth-0.0/11.6
Feedback-30-40% (Move p2 knob between 30-40% for best settings)
Operation-Make sure you turn j1 knob to X16 after that everything is automatic (no need to move anything)
Manual Low Pass Filter
Deck-1
Mix-100%
Resonance-1.8 (can be moved anywhere from 1.5 to 2.5)
Depth/Freq-Turn p2 knob all the way to the left make sure white line turns thin
Operation-Move p1 knob clockwise from left to right
Automatic Highpass Filter
Deck-2
Frequency-Full
Mix-Full
Resonance-Full
Operation-Turn J1 knob to X16 or whatever beat amount you want the filter to work (X16,X4,X8,X1/2,etc) Filter will work automatically without
moving anything
Echo
Deck-Save/use to whatever decks (1 or 2)
Mix-Any number below 65% (My personal preference is to keep it at 42%)
Feedback-Any number below 65% (My personal preference is to keep it at 48%
Delay-I prefer to keep this at X1 (1 beat delay)
Operation-Move j1 knob to whatever amount of beats you want it to delay (x16,X4,X8,1/2,etc)
Hold Echo
Deck-Save/use to whatever decks (1 or 2)
Mix-Any number below 50% (My personal preference is to keep it at 48%)
Feedback-Any number below 74% (My personal preference is to keep it at 61%)
Delay-I prefer to keep this at X1 (1 beat delay)
Operation-Move j1 knob to whatever amount of beats you want it to delay (x16,X4,X8,1/2,etc)
Best Effect Settings For TTM 57SL
DONT FORGET TO SAVE YOUR SETTINGS BY GOING TO SET-UP THAN TO HARDWARE AND CLICK ON "SAVE TO MIXER" EACH TIME YOU CONFIGURE A EFFECT TO THE APPROPRIATE DECK.
Manual High Pass Filter
Deck-1
Frequency-Turn left till white line gets thin
Resonance-3.0
Mix-100%
Operation-Move p1 knob clockwise from left to right
Flanger
Deck-1
Mix-100%
Delay Time-X16 (Turn J1 Knob To X16)
Delay/Depth-0.0/11.6
Feedback-30-40% (Move p2 knob between 30-40% for best settings)
Operation-Make sure you turn j1 knob to X16 after that everything is automatic (no need to move anything)
Manual Low Pass Filter
Deck-1
Mix-100%
Resonance-1.8 (can be moved anywhere from 1.5 to 2.5)
Depth/Freq-Turn p2 knob all the way to the left make sure white line turns thin
Operation-Move p1 knob clockwise from left to right
Automatic Highpass Filter
Deck-2
Frequency-Full
Mix-Full
Resonance-Full
Operation-Turn J1 knob to X16 or whatever beat amount you want the filter to work (X16,X4,X8,X1/2,etc) Filter will work automatically without
moving anything
Echo
Deck-Save/use to whatever decks (1 or 2)
Mix-Any number below 65% (My personal preference is to keep it at 42%)
Feedback-Any number below 65% (My personal preference is to keep it at 48%
Delay-I prefer to keep this at X1 (1 beat delay)
Operation-Move j1 knob to whatever amount of beats you want it to delay (x16,X4,X8,1/2,etc)
Hold Echo
Deck-Save/use to whatever decks (1 or 2)
Mix-Any number below 50% (My personal preference is to keep it at 48%)
Feedback-Any number below 74% (My personal preference is to keep it at 61%)
Delay-I prefer to keep this at X1 (1 beat delay)
Operation-Move j1 knob to whatever amount of beats you want it to delay (x16,X4,X8,1/2,etc)
At 4:11 PM 2 November 2009
latinblood2k1 wrote
To post on the forum you need to log in. Click here to log in, or if you do not yet have an account then click here to create an account.